| Stock Code: B93 | | Publisher Code: HA0605 | | ISBN 10: 1850105189 | | Published: 1990 | | Pages: 420 | | Dimensions: 210x280mm | | Illustrations: HC Bound, b/w ill |
|
|
Click to enlarge |
 
| |
Audi Models Covered
Audi 80, 90 & Coupe 1979 - 1988 Workshop Manual covers models with four - & five-cylinder engines
1979 to Oct 1996 (80 and 90)
1981 to Nov 1988 (Coupe)
1588cc, 1595cc, 1781cc, 1921cc, 1994cc, 2144 cc & 2226cc.
Does not cover Diesel engine or Quattro models.
- Step-by-step procedures with hundreds of illustrations and photos
- Written from hands-on experience using common tools
- Colour spark plug diagnosis and bodywork repair
- Quick and easy fault diagnosis sections
- Wiring diagrams
About this manual
Its aim
The aim of this manual is to help you get the best value from your vehicle. It can do so in several ways. It can help you decide what work must be done (even should you choose to get it done by a garage), provide information on routine maintenance and servicing, and give a logical course of action and diagnosis when random faults occur. However, it is hoped that you will use the manual by tackling the work yourself. On simpler jobs it may even be quicker than booking the car into a garage and going there twice, to leave and collect it. Perhaps most important, a lot of money can be saved by avoiding the costs a garage must charge to cover its labour and overheads.
The manual has drawings and descriptions to show the function of the various components so that their layout can be understood. Then the tasks are described and photographed in a step-by-step sequence so that even a novice can do the work.
Its arrangement
The manual is divided into thirteen Chapters, each covering a logical sub-division of the vehicle. The Chapters are each divided into Sections, numbered with single figures, eg 5; and the Sections into paragraphs (or sub-sections), with decimal numbers following on from the Section they are in, eg 5.1, 5.2, 5.3 etc. It is freely illustrated, especially in those parts where there is a detailed sequence of operations to be carried out. There are two forms of illustration: figures and photographs. The figures are numbered in sequence with decimal numbers, according to their position in the Chapter — eg Fig. 6.4 is the fourth drawing/illustration in Chapter 6. Photographs carry the same number (either individually or in related groups) as the Section or sub-section to which they relate. There is an alphabetical index at the back of the manual as well as a contents list at the front. Each Chapter is also preceded by its own individual contents list.
References to the 'left' or 'right' of the vehicle are in the sense of a person in the driver's seat facing forwards. Unless otherwise stated, nuts and bolts are removed by turning anti-clockwise, and tightened by turning clockwise. Vehicle manufacturers continually make changes to specifications and recommendations, and these, when notified, are incorporated into our manuals at the earliest opportunity.
This manual is not a direct reproduction of the vehicle manufacturers' data, and its publication should not be taken as implying any technical approval by the vehicle manufacturers or importers. Whilst every care is taken to ensure that the information in this manual is correct, no liability can be accepted by the authors or publishers for loss, damage or injury caused by any errors in, or omissions from, the information given.
Introduction to the Audi 80, 90 and 4000
The 'new' Audi 80 was announced in late 1978 and was available in the UK in March 1979. The equivalent North American Audi 4000 became available in 1980. These models are similar to the 'new' 100 range, but differ from the earlier Audi 80 (UK) and Audi Fox (North America) by incorporating a sloping bonnet, an additional side window behind the rear door, and wrap-around plastic bumpers. The Coupe version incorporates front and rear spoilers and side rubbing strips, while the top saloon model, the CD, incorporates a front spoiler and side rubbing strips.
The Audi 90 was announced in late 1984 and was available in the UK in early 1985. This model has the same bodyshell as the 80, but has dual headlamps, foglamps and indicators set in the front bumper, and a higher level of trim and equipment. The model range is comprehensive and offers a choice of trim, four or five-cylinder engine, and four or five-speed gearbox or automatic transmission. Full instrumentation is provided together with electric windows, a central locking system and power steering, according to model. UK models are available with a carburettor or fuel injection engine — North American models are only available in fuel injected form. |
